Steel GradesS235 Chemical information,Mechanical properties Physical properties, Mechanical properties, Heat treatment, and Micro structure - (%) Akv - Akv/J HBS 123-321 - HRC 30 - S235 Mechanical Properties Tensile strength 231-231 b/MPa Yield Strength 154 0.2 /MPa Elongation 56 5(%) - (%) Akv - Akv/J HBS 235-268 - HRC 30 - EN 10025 Grade S235JR as-rolled condition (+AR) - Low S235JR is applicated for construction parts of moderate strength load, which are not liable to inspection. Max. product thickness accounts for 25 mm. For this steel are available (see material No. 1.0120 acc. to DIN EN 10025) grades for:- folding (KQ)-S235JRC - cold forming of sections (KP)-S235JRC - cold drawing (KZ)-S235JRC.
EN 10025-2 S235 Steel. EN 10025-2 S235 steel is a non-alloy carbon structural steel grade, according to EN 10025-2, S235 material is devided into 3 quality grades:S235JR (1.0038) Impact energy 27 Joules at room temperature 20 , S235J0 (1.0114) Impact energy 27J at 0 , and. S235J2 (1.0117) Impact energy 27 J at -20 . EN10025 S235JR steel plate standard and specificationS235JR (+N) is a non-alloy structural steel. We have large quantities of S235JR in stock with thicknesses up to 200 mm. The minimum thickness is normally 5 mm. Plates are available up to 3.5m wide and 14m long. Most plates are certified to S235J0 Steel (EN 1.0114 Material) Datasheet, Properties 235 means the minimum yield strength (MPa) for the steel thickness 16 mm; J0 refers to the impact energy 27 J at 0 ° C. Material S235J0 Datasheet. The following tables and lists show the steel S235J0 datasheet and the technical data, including chemical composition, mechanical properties and physical properties etc.
ties, the steel grades of the S235-S355 series are used as material for wheels of passenger cars, lorries and other vehi-cles. S235JR Non-alloy structural steels 1) Nom. thick. e Yield strength ReH 16 mm 235 MPa >16 mm 225 MPa Nom. thick. e Tensile strength Rm <3 mm 360 510 MPa 3 mm 360 510 MPa Nom. thick. e Total elong. S235JR EN 10025-2 (Euronorm) - MetalDatafoS235JR EN 10025-2 (Euronorm) Standards EN 10025-2 Hot rolled products of structural steels. - Part 2:Technical delivery conditions for non-alloy structural steels Other designations Euronorm 1.0038 - EN 10025-2 South Africa 1.0038 - SANS 50025-2 S235JR - SANS 50025-2 USA 1.0038 - ASME SA/EN 10025-2 S235JR - ASME SA/EN 10025-2 Chemical composition S235JRG2 Material S235JRG2C+C Equivalent, Meaning, Dec 14, 2019 · S235JRG2C+C, S235JRG2 Meaning. S is short for Structural Steel; 235 refers to the minimum yield strength value (MPa) for the steel thickness 16mm; JR means the impact energy value 27 J at room temperature. G2 is a subdivided quality grade. C means the steel is
May 11, 2012 · Yield Strength. The yield strength of structural steel measures the minimum force required to create a permanent deformation in the steel. The naming convention used in European Standard EN10025 refers to the minimum yield strength of the steel grade tested at 16mm thick.S235JR - OvakoS235JR EN10025-2 (ref) Std CEV 0.35 Min - - - - - - Pcm 0.25 Max 0.17 1.40 0.035 0.035 0.55 0.0120 max max max max S235JR:C max 0,20 % for sizes over 40 mm. Only CEV required in standard SS 1312:Not binding recommendation for Mn (0,4 - 0,7) % in standard